Ready-Mix Concrete · Standard concretes
C35/45 Ready-Mix Concrete
For tall buildings, bridge elements and structures exposed to aggressive environments.
Strength class
C35/45
Technical specifications
- Cylinder compressive strength (fck)
- 35 MPa
- Cube compressive strength (fck,cube)
- 45 MPa
- Standard
- TS EN 206 / TS 13515
- Typical exposure class
- XC4
- Consistence class
- S3 – S4 (S5 on request)
- Max. aggregate size
- Dmax 22 mm (15 / 32 mm available)
- Placement
- Pumped or direct from mixer
Applications
- Tall buildings
- Bridge elements
- Water structures
- Heavily loaded slabs
C35/45 ready-mix concrete has a 28-day characteristic cylinder compressive strength of 35 MPa and a cube strength of 45 MPa. It is produced to TS EN 206, with the water/cement ratio and minimum cement content set for your project\'s exposure class.
Production and delivery
Consistence is adjusted to the placement method (S3–S5); superplasticisers are used for pumped pours. Samples from every delivery undergo 7 and 28-day cube tests in our laboratory and the results are reported to you.
Good practice
- Place the concrete within 90 minutes of leaving the plant.
- Never add water on site; specify the consistence you need when ordering.
- Keep the concrete moist-cured for at least 7 days after placing.
Calculate how many cubic metres of C35/45 you need.
In the same category
Related products
C16/20 Ready-Mix Concrete
An economical choice for non-structural work such as blinding, levelling and site slabs.
ViewC20/25 Ready-Mix Concrete
For non-structural elements, garden walls, pavements and screed bases.
ViewC25/30 Ready-Mix Concrete
The lowest class permitted for reinforced concrete structures; the most common choice for housing.
View